Coupler Replacement on the 29 Whirlpool Washer: A Comprehensive Guide

• Screwdriver
• Socket wrench
• Pliers
• New coupler

1. Unplug the washer. This is an important safety precaution.
2. Remove the back panel of the washer. There are usually two screws that hold the back panel in place.
3. Locate the coupler. The coupler is a small, black part that is located between the motor and the transmission.
4. Disconnect the wires from the coupler. There are two wires that connect to the coupler. Use a screwdriver to loosen the screws that hold the wires in place.
5. Remove the bolts that hold the coupler in place. There are usually two bolts that hold the coupler in place. Use a socket wrench to remove the bolts.
6. Pull the coupler off of the motor shaft. The coupler may be stuck on the motor shaft. Use pliers to gently pull the coupler off of the shaft.
7. Install the new coupler. Slide the new coupler onto the motor shaft. Make sure that the coupler is fully seated on the shaft.
8. Reconnect the wires to the coupler. Use a screwdriver to tighten the screws that hold the wires in place.
9. Install the bolts that hold the coupler in place. Use a socket wrench to tighten the bolts.
10. Replace the back panel of the washer. Screw the back panel back into place.
11. Plug the washer back in.
12. Test the washer. Run the washer through a test cycle to make sure that the new coupler is working properly.

If you're having trouble replacing the coupler, here are a few troubleshooting tips:

• Make sure that the new coupler is the correct size and type for your washer.
• Make sure that the coupler is fully seated on the motor shaft.
• Make sure that the wires are properly connected to the coupler.
• If you're still having problems, you may need to call a qualified appliance repair technician.

By following these instructions, you can easily replace the coupler on your Whirlpool 29 washer. This simple repair can save you time and money, and it will help you keep your washer running smoothly.

Coupler Replacement on the 29" Whirlpool Washer

5 out of 5

Language	:	English
File size	:	1333 KB
Text-to-Speech	:	Enabled
Screen Reader	:	Supported
Enhanced typesetting	:	Enabled
Print length	:	26 pages
Lending	:	Enabled

FREE

Coupler Replacement on the 29" Whirlpool Washer

5 out of 5

Language	:	English
File size	:	1333 KB
Text-to-Speech	:	Enabled
Screen Reader	:	Supported
Enhanced typesetting	:	Enabled
Print length	:	26 pages
Lending	:	Enabled

FREE